NITRONIC® 60 (Alloy 218) (UNS S21800) Carburization
NITRONIC 60 Datasheet
Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13, C 0.10, Fe Bal.
High Performance Alloys stocks and produces this grade in the following forms: Bar, flat bar, square bar, wire spool. wire cuts, loose coil, sheet, plate, strip, coil, tube, pipe, fastener, disk, machined, billet, ingot. Request quote on this grade.
- Download Brochure 4 MB PDF - Or view as HTML
- Download Bulletin 57 KB PDF
- View Nitronic Machining Brochure
- Download FDA statement concerning the use of stainless steels as food contact surfaces of equipment. 154 KB PDF
Austenitic Stainless
NITRONIC 60 Carburization
Armco NITRONIC 60 stainless retained the best combination of strength and ductility after exposure compared to Types 316L and 309, as shown below.
Carburization |
|||||
|---|---|---|---|---|---|
| Alloy | Exposed | UTS | 0.2% YS | Elon. | Bend |
| (Ksi) | (Ksi) | % in 4XD | 1.5T | ||
| NITRONIC 60 | No | 116.0 | 49.5 | 74.0 | 180° |
| NITRONIC 60 | Yes | 91.5 | 58.0 | 19.0 | 100° |
| Type 316L | No | 76.0 | 30.0 | 74.4 | 180° |
| Type 316L | Yes | 65.0 | 36.0 | 21.3 | 110° |
| Type 309 | No | 99.0 | 54.0 | 64.7 | 180° |
| Type 309 | Yes | 85.5 | 45.5 | 14.0 | 75° |
This wear data republished from Armco brochure. NITRONIC is a trademark of AK Steel.
- Automotive valves - can withstand gas temperatures of upto 1500°F for a minimum of 50,000 miles.
- Fastener galling - capable of frequent assembly and disassembly, allowing more use of the fastener before the threads are torn up, also helps to eliminate corroded or frozen fasteners.
- Pins - Used in roller prosthetics & chains to ensure a better fit of parts (closer tolerance, non-lubricated) and longer lasting.
- Marine shafts - better corrosion than types 304 and 316, with double the yield strength.
- Pin and hanger expansion joints for bridges - better corrosion, galling-resistance, low temperature toughness, & high charpy values at sub-zero temps compared to the A36 and A588 carbon steels commonly used.
Material in this bulletin has been reprinted from Armco Bulletin No S-45, other Armco sources, and HPAlloys data.
NITRONIC ® is a registered trademark of AK Steel.
Page Contents: