• Login
  • Register
  • 800-HPALLOY
  • 1985 E 500 N Windfall, IN 46076
    444 Wilson St Tipton, IN 46072
    Post Office Box 40 Tipton, IN 46072
    tel:8004725569

Nickel 200 (UNS N02200)


Ni 99.0 C 0.15 Cu 0.25 Fe 0.40 Mn 0.35 Si 0.35 S 0.01

High Performance Alloys stocks and produces this grade in the following forms: Bar, sheet, plate, tube, pipe, fastener. Request quote on this grade.

 

Overview

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.



Applications

  • Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
  • Production of viscose rayon. Manufacture of soap.
  • Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
  • Manufacture of vinyl chloride monomer.
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.

    Chemical Requirements

    Ni

    C

    Mn

    Cu

    S

    Si

    Fe

    Max

    0.15

    0.35

    0.25

    0.01

    0.35

    0.40

    Min

    99.0


    Mechanical Property Requirements

    Ultimate Tensile

    Yield Strength (0.2% OS)

    Elong.

    R/A

    Hardness

    Cold Worked

    Min

    75 KSi

    50 KSi

    15

    Max

    Min

    515 MPa

    345 MPa

    Max

    Hot Worked

    Min

    55 KSi

    15 KSi

    40

    Max

    Min

    380 MPa

    105 MPa

    Max


    Specifications

    Form

    Standard

    Metal Type

    UNS N02200

    Bar

    ASTM B160 Din 17752 BS 3076

    Wire

    Sheet

    ASTM B162 Din 17750 BS 3072

    Plate

    ASTM B162 Din 17750 BS 3072

    Tube

    ASTM B622 ASTM B161 ASTM B163 Din 17740 BS 3074

    Pipe

    ASTM B622 ASTM B161 Din 17740 BS 3074

    Fitting

    ASTM B366

    Forging

    ASTM B564

    Weld Wire

    ERNi-CI

    Weld Electrode

    ENi-1

    NA 11

    All forms

    Din

    2.4066 All forms


Machining

 

Machinability Ratings

MACHINING DATA
Carbide tools are suggested
for rates better than 50% of Type 304.
Machining Type Suggested starting rates are:
Single Point turning : Roughing - 0.15" depth, 0.015"/rev feed -175 SFM
Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling : 1/4" Dia hole - 0.004"/rev feed - 60 SFM
1/2" Dia hole - 0.007"/rev feed - 60 SFM
3/4" Dia hole - 0.010"/rev feed - 60 SFM
Reaming : Feed - same as drilling - 100 SFM
Side and Slot Milling : Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM
Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM
These rates are for carbide tools,
Type C-2 for roughing, drilling and reaming.
Type C-3 for finishing.


<